|
IMG_1159
Looks like I can go back down a bit in the rear. I installed TME lowering springs in the back to raise the car up, I think it sits about 3/4" or so higher than I had it with the cut wagon springs. Time to chop some off the top of these...
Date: 03/08/2010
Views: 196
|
IMG_1161
Got one side on. Not sure if the driver's side will fit in the back enough to allow me to drive it around some.
Date: 03/08/2010
Views: 132
|
IMG_1163
The wheel rubbing on the inside. Needs more spacer, but I don't have more... This was with an effective ET5.5
Date: 03/12/2010
Views: 265
|
IMG_1164
Date: 03/12/2010
Views: 102
|
|
IMG_1165
Date: 03/12/2010
Views: 155
|
IMG_1167
Date: 03/12/2010
Views: 120
|
IMG_1170
Date: 03/12/2010
Views: 167
|
IMG_1172
Date: 03/12/2010
Views: 178
|
|
IMG_1175
Date: 03/12/2010
Views: 211
|
IMG_1177
Date: 03/12/2010
Views: 155
|
IMG_1179
Date: 03/12/2010
Views: 159
|
IMG_1181
Date: 03/12/2010
Views: 136
|
|
IMG_1184
Date: 03/12/2010
Views: 156
|
IMG_1187
Date: 03/12/2010
Views: 160
|
IMG_1188
Date: 03/12/2010
Views: 187
|
IMG_1195
Date: 03/12/2010
Views: 125
|
|
IMG_1196
Date: 03/12/2010
Views: 174
|
IMG_1197
Date: 03/12/2010
Views: 152
|
IMG_1198
Date: 03/12/2010
Views: 146
|
IMG_1199
Needs 255/30s and more spacer.
Date: 03/12/2010
Views: 145
|
